Superabrasive
Owner’s Manual Original Language – Lavina
®
32G-X/GTX
7/2019
11
Figure 3.1
Figure 3.2
Figure 3.3
3. HANDLING AND TRANSPORTATION
POSITIONING THE HANDLE
USING THE STEERING BRACKET
By loosening the swivel bolt (Fig. 3.1-2), one can turn the steering bracket (Fig.
3.1-3) to a new position. To turn the steering bracket down (Fig. 3.3) you have to
loosen the swivel bolt (Fig. 3.1-2) and push it in, for security reasons.
The handle can be positioned in three positions:
Transport position to store or to transport or to hoist the machine (fig. 3.5)
Working position (fig. 3.6) and Flipping position (fig. 3.7)
To change the handle positions pull the knob (Fig. 3.1-1, Fig. 3.4), and move the handle up or down.
To choose the transport-position pull the additional the
security pin (Fig. 3.9, Fig. 3.10) out and replace it when
the handle is in position. Never lift the machine by the
handle without mounting this pin.
FLIPPING THE MACHINE UP
To change the tools, put the handle in the flipping
(upright) position (Fig. 3.7), grab the steering bracket and
pull the machine down using all bodyweight (one foot on
the control box can help). Put the bracket down on the
floor (Fig. 3.8) and change tools. One foot on the control box can help again while putting the machine down.
Figure 3.7
Figure 3.6
Figure 3.8
Figure 3.5
Figure 3.9
Figure 3.10
Figure 3.4
