Superabrasive
Owner’s Manual Original Language – Lavina
®
32G-X/GTX
7/2019
22
Return
machine to
authorized service center
for overall checkup of the Engine. For Propane safety, have
the machine serviced by a
Certified Technician
, including emission check.
CHECK EVERY 400 WORKING HOURS
In addition to checks made every 200 working hours, replace sealer and V-rings as described in chapter
“
DISMOUNTING TOOL HOLDERS TO CHANGE V-RINGS AND FELT-RINGS
”.
Remove the protective covers under the generator. Check the belt that runs the generator. If necessary, tighten it,
making sure not to
“over tension.” Replace it if necessary.
Return machine to authorized service center for overall checkup of the Engine. For Propane safety, have the
machine serviced by a Certified Technician, including emission check.
VACUUM
As stated previously, frequently check hoses and other parts for clogging.
WATER LEAKS
Replace any leaking parts immediately as the water could damage your machine
ELECTRICAL SYSTEM
Dust should not enter the control box, as it will destroy the contacts. Remove (blow out) any dust present.
MECHANICAL PARTS
Parts such as the belt, seal rings, cap rings, spiders and buffers and guard assembly are subject to wear and should be
replaced as needed.
