Superabrasive Lavina 32G -X, User Manual

Page: 15 / 44

Superabrasive
Owner’s Manual Original Language – Lavina
®
32G-X/GTX 7/2019
15
CONTROL BOARD
1 Start/Stop Engine switch Turn key
fully to the right (make contact) to ignite
the engine. Fully to the left will arrest the
engine
.
2 Start/Stop clutch Start will
electronically activate the grinding plates
to spin; stop will disconnect engine from
grinding heads
3 Throttle Push forward to accelerate.
4 Digital Tachometer/workings hours
indicator
When running, it indicates the
revolutions per minute of the motor (see
the conversion table to know the rpm of
the tools). When not running, it indicates
the worked hours.
The hour meter will blink between 48-52
hours as a reminder for oil change.
5 Fuse 30 Amp fuse for the electrical system.
6 Water pump switch Lights orange when the water pump is running.
CONTROL BOARD WITH GTX SYSTEM
1 Start/Stop Engine switch Turn key fully to the right
(make contact) to ignite the engine. Fully to the left will
arrest the engine
.
2 Start/Stop clutch Start will electronically activate the
grinding plates to spin; stop will disconnect engine from
grinding heads
3 Throttle Push forward to accelerate.
4. Complete Monitor Assembly (Fuel-Minder) is a
high-performance digital fuel control system
(fig. 4.6)
.
5 Fuse 30 Amp fuse for the electrical system.
6 Water pump switch Lights orange when the water
pump is running.
rpm
engine rpm
tools
2000 600
2100 630
2200 660
2300 690
2400 720
2500 750
2600 780
2700 810
2800 840
2900 870
3000 900
3100 830
3200 960
3300 990
3400 1020
3500 1050
3600 1080
Figure 4.5