
SUNX Limited MJE-SF4B01 No.0005-03V
- 9 -
1-3
Applicable Standards / Regulations
This device complies with the following standards / regulations.
<EU Directives>
EU Machinery Directive 98/37/EC, EMC Directive 89/336/EEC
<European Standards>
EN 61496-1 (Type 4), EN 55011, EN 954-1 (Category 4)
<International Standards>
IEC 61496-1/2 (Type 4)
<Japanese Industrial Standards (JIS)>
JIS B 9704-1/2 (Type 4), JIS B 9705-1 (ISO 13849-1) (Category 4)
<Standards in U.S. / Canada)>
UL 61496-1/2 (Type 4), UL 1998, CSA C22.2 No.14, CSA C22.2 No.0.8
<Regulations in U.S.>
OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
Regarding EU Machinery Directive, a Notified Body, UL International Demko A/S, has certi-
fied with the type examination certificate.
With regard to the standards in US / Canada, a NRTL, UL (Underwriters Laboratories Inc.)
has certified for Canada-U.S. Listing.
<Reference>
The conformity to JIS, OSHA and ANSI for this device has been evaluated by ourselves.
The C-CL US Listing Mark
indicates compliance with both Canadian and U.S. requirements.
This device conforms to the EMC directive and the Machinery directive. The
mark on the sensor main
body indicates that this product conforms to the EMC directive.
<Regulations in Japan>
Standards for press machine or shears safety equipment structure
(Ministry of Health, Labor and Welfare Notice No.102, issued September 21, 1978)
This product satisfies the ‘Model Examination’ as set forth in the Japanese Industrial Safety
and Health Laws Provision 44-2 as indicated below.
<When using this device on its own>
Model Examination No.: No.TA347
Conforming Standards: Standards for press machine or shear safety equipment structure
(Ministry of Health, Labor and Welfare Notice No.102, issued September 21, 1978)
* No.TA347 is a Model Examination No. for this device only.
Up to three sets (maximum number of the beam channel: 192 beam channels) can be
connected in series connection.
* The Model Examination No.TA347 is indicated on the device.
When this device is used as safety equipment for press machines, be sure to use the
cable with protective tube (
SFPB-
) (optional). If the cable with protective tube
(
SFPB-
) (optional) is not used, this device cannot be used as safety equipment for
press machines.