SUNX Limited MJE-SF4B01 No.0005-03V
- 26 -
<In case of using intermediate supporting bracket (MS-SFB-2) (accessory)>
1. Loosen the hexagon-socket head bolt [M4 (length: 12mm)] screw of the intermediate
supporting bracket (
MS-SFB-2
).
2. Insert the side of this device into the intermediate supporting bracket, and fix it with the
hexagon-socket head bolt [M4 (length: 12mm)].
The tightening torque should be 1.2N
㨯
m or less.
Refer to ‘
6-3 Dimensions
’ for the mounting position of the intermediate supporting
bracket.
When setting the intermediate supporting bracket on both side surfaces of this device, fit
the four pits and projectiles of both side surfaces of the main body to those of both side
surfaces (inner surfaces) of the intermediate supporting bracket.
3. After aligning the beam axis, mount the intermediate supporting bracket to the mounting
surface using two hexagons-socket head bolts [M5 (please arrange separately)].
For the details of beam axis alignment, refer to ‘
2-6-1 Beam-axis Alignment’
.
