SUNX Limited MJE-SF4B01 No.0005-03V
- 62 -
<For series connection>
In case of series connection, if any of the sets is in light blocked status, the control output
(OSSD 1, OSSD 2) turns OFF.
<Reference>
The emitter / receiver indicators indicate the output status.
The following figure shows the status of the indicators with Sub Sensor A2 in light blocked status.
Notes:1) Since the color of the operation indicator changes according to the ON / OFF state of the control
output (OSSD 1, OSSD 2), the operation indicator is marked as ‘OSSD’ on the sensor.
2) The status of the emitter / receiver indicators during operation above shows the case in PNP output
setting mode. In case of NPN output setting mode, the NPN indicator (orange) lights up.
