Chap 5. Code Setting Menu
71
Problem Solution
-
If you still can’t solve the problem, contact SUNWAVE
for help.
-
Original remote might not be compatible with learning
procedure.
Macro does not work.
•
Be sure to aim the SRC-7000 at the devices while the macro
commands are being sent.
•
Macro was not properly set up. Repeat macro set-up
procedure.
A key of your existing
remote performs two or
more functions
•
Some remotes issue multiple commands when a key is held
down. Please be sure to teach different keys of SRC-7000 for
these different commands.
•
Each key of SRC-7000 can only learn one command. E.g.
Cycle key
The LCD screen turns off.
•
The SRC-7000 is preset automatically to switch the LCD off
after 1 minute by default if left unused.
•
Just tap the touch screen to turn the SRC-7000 back on again.
