SRC-7000 User’s Manual
8
1.5.2 The rear side of SRC-7000
Figure 1-2: Rear view
1.
IR Port
You can point the IR port at the IR
receiver of targeted device to
control the unit.
2.
Reset switch
You can reset the SRC-7000 while
the SRC-7000 can’t work properly
or hang on.
3.
Back label
Back label marks the model
number and the briefly
specifications.
4.
Buzzer hole
Beeps signal are released from
here.
5.
Battery compartment
You can remove the cover to
replace the 3xAAA alkaline
batteries or Ni-MH rechargeable
batteries.
6.
Learning eye (P.36)
ARC-7000 receives the IR codes
from here and saves the
corresponding codes. Makes the
original remote control point at the
Learning eye of SRC-7000 and
press the corresponding buttons to
send out the IR signals. In this
way, SRC-7000 will learn the IR
codes from your original device.
