SRC-7000 User’s Manual
22
“Learning” and “Done”. Please refer to the followings to get further
understanding.
3.1.2 Load the codes for the newly-added device
When adding a new device successfully, you will be asked if you
will load the codes for your device. There are two ways to load IR
remote codes for your newly-added device: “
Pre-code
” and
“
Learning
”. Please choose one of these two ways to load the
codes. If you don’t want to load any codes for the device, just select
“
Done
” to finish the setting process.
A. Pre-code
SRC-7000 is equipped with a mass pre-programmed code
database. With the function, you are able to load the remote codes
for your device. It also enables you to control the device even if you
lose your original remote.
1.
When you successfully add a new device, please decide if you
continue to load the codes for the device. If you want to use
“pre-code” to load the codes, please choose the item.
2.
Please select the brand of your device. You just need to select
the first letter of your brand. For example,
n
if your device
belongs to Sony, please select “S” as your brand.
