7.12 Date/Time (Clock)
Enter setup of Date/Time (Clock). Set the “Year”, “Month”, “Date”, “Hour”, and “Minute”. If
you select to turn off the clock function, a clock will not be displayed under measurement mode.
The calibration time of calibration records will also show “OFF” under calibration overview
display.
Note:
The transmitter can remain the clock in action even if the power supply is cut off. If it
cannot, which mean the battery fails, please replace the 3V CR2025 Li battery inside the
transmitter.
Enter “RS-485 Communication” Setup
Press to confirm it.
Press or to set
the hour part, and press
to move to the minute part
and adjust it afterwards.
Press or to set
the month part, and press
to move to the date part and
adjust it afterwards.
Press or to set
the year.
Press to confirm it.
Press to confirm it.
Press
or to select
whether to activate Clock
function or not. If not, the
guide menu will go to setup
of Digital Filter directly.
Press to confirm it.
Press to confirm it.
32