7.4 Measurement Mode/Unit (Mode/Unit)
After entering setup mode, select “Mode/Unit” and press to configure
measurement settings: reference table, unit, and display mode. Selectable mode
include: MLSS, Digested Sludge, Activated Sludge, and Defined.
•
MLSS: (mg/l or ppm)
•
Activated Sludge Matrix: Built-in activated TSS and SiO
2
matrix curve (mg/l).
•
Digested Sludge Matrix: Built-in digested TSS and SiO
2
matrix curve (mg/l).
•
Defined Table: Manually defined table and curve (mg/l or ppm).
Note: Activated Sludge and Digested Sludges Matrix are only applicable to
munincipal water measurements (see Appendix, Table 1 & 2).
Configuration Complete
Defined Table
Measurement Display Settings
(continued on next page)
Press to confirm it.
Press to confirm it.
Press to confirm it.
Press to confirm it.
Press or to
select measurement unit.
Press or to
select the table.
22