Doc. Title
Author
Page of Pages
ST310U OPERATION MANUAL
JH KIM
64 of 66
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.08
2017/7/13
Suntech International Ltd.
Confidential Document
1. About when the anti-theft system starts working?
There are 2 different types of the start timing of the anti-
theft function as described below:
-
Under an assumption that your device (ST300) has been configured with the “Anti-theft Button”, twenty
(20) seconds later after the driver parks the vehicle (ignition goes to off), opens and closes the door, the
protection function starts working by making a beep just one time.
-
Under an assumption that your device (ST300) has been configured with the “Anti-theft Button2”, twenty
(20) seconds later after the driver parks the vehicle (ignition goes to off), opens and closes the door, the
protection function starts working silently.
2. After the door is opened and closed in state of vehicle protection, the driver should press the anti-theft button
within the pre-defined time period
of “Delay of Anti-theft Release” described in the “New Parameter.
3. If the button is pressed for 1 second within this time period, the protection function is released. If the driver has
not pressed the button within this time period, anti-theft emergency of the device starts working immediately.
4.
In emergency, the buzzer and the immobilizer are activated if they are connected properly. After the preset
time of
“
Delay of Anti Theft Alert”, the device sends emergency report about anti-theft occurring.
5.
However, you can stop such an emergency functioning of the device if you were not expecting such an
emergency. The followings are two (2) alternatives on how to stop functioning the Emergency:
Alt. 1. By pressing anti-theft button for 1 second, the emergency situation can be stopped immediately.
Alt. 2. As soon as all the immobilizer and the buzzer start getting deactivated by commands of the
“Disable Output”, the emergency situation will be over.
