Doc. Title
Author
Page of Pages
ST310U OPERATION MANUAL
JH KIM
21 of 66
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.08
2017/7/13
Suntech International Ltd.
Confidential Document
4-8. Circular geo-fencing parameters
This table shows how a device user can set parameters for circular geo-fencing. In order to set these parameters
properly, read carefully the contents and <Example> along with <Note> described in the bottom inside the table
below. In setting a new device, the
‘SyncTrak’ will show you detailed explanation on how to set parameters relating
to these
‘Fields’.
HDR DEV_ID VER GEO_ID ACTIVE LAT LON RADIUS IN OUT
Field
Marks
Value
Meaning
HDR
“ST300CGF”
Command type
DEV_ID
9 char.
Device ID
VER
“02”
Protocol Version
GEO_ID
‘1’ ~ ‘200’
Geo-fence ID
ACTIVE
‘0’ or ‘1’
enable (1) or disable (0)
LAT
String
Central latitude of circular area
LON
String
Central longitude of circular area
RADIUS
String
meter
Radius of circular area
Range : 30~65,000
IN
‘0’ or ‘1’
Alert that a vehicle enters into the circular area.
Enable (1) or disable (0)
OUT
‘0’ or ‘1’
Alert that a vehicle goes out from the circular area.
Enable (1) or disable (0)
<Example>
[command] ST300CGF;100850000;02;1;1;+37.127.000000;50;1;1
[response] ST300CGF;Res;100850000;010;1;1;+37.127.000000;50;1;1
