Doc. Title
Author
Page of Pages
ST310U OPERATION MANUAL
JH KIM
10 of 66
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.08
2017/7/13
Suntech International Ltd.
Confidential Document
4. Configuration
Before a device starts being operated, its parameters should be set first. This
chapter
shows the string to be sent to
device.
There are 3 options of sending string.
Option 1: by using PC
Option 2: by using GSM/GPRS network
Option 3: by messaging via SMS
In practice, configuration can be made more efficiently with
‘SyncTrak’, i.e. a setting tool provided by Suntech.
Once a device receives a command from the server, it gets back to the server with a relevant response. Device
also changes some parameters (if it is required to do so) or takes an action as instructed below as per the
command sent by the server.
4-1. Network parameters
The following table shows how and what parameters are required to be set so that the device can be connected
with network. As shown in the bottom part of this table, an
‘<Example>’ of ‘[command]’ and ‘[response]’are made in
string respectively when the configuration for the networking is completed.
HDR
DEV_ID
VER
AUTH
APN
USER_ID
USER_PWD
SEVER_IP
SEVER_PORT
B_SEVER_IP
B_SEVER_PORT
SMS_NO
PIN_NO
Field
Marks
Value
Meaning
HDR
“
ST300NTW
”
Command type of Header
DEV_ID
9 char
.
Device ID
VER
“02”
Protocol Version
AUTH
‘0’ /‘1’/’A’
GPRS authentication
0 : PAP(
‘NO’ in ‘SyncTrak’)
1 : CHAP(
‘YES’ in‘ SyncTrak’)
A: Automatic GPRS set.
In this case, parameters for APN, USER_ID and
USER_PWD field should remain empty.
APN
String
Access Point Name
USER_ID
String
ID for GPRS Access
USER_PWD
String
Password for GPRS Access
SEVER_IP
String
Server IP Address
SEVER_PORT
String
Server Port
B_SEVER_IP
String
IP Address of Backup Server
B_SEVER_PORT
String
Port of Backup Server
SMS_NO
String
Phone number that will receive the SMS report sent by the
device.
