Sunsystem BURNIT CombiBurn DC-A Series, Technical Passport, Installation And Operation Manual

Page: 6 / 72

6
EN
TECHNICAL PASSPORT INSTALLATION and OPERATION MANUAL
Table 2. European Certification of Wood Pellets for Heating Purposes
Parameters Units ENplus-A1 ENplus-A2 EN-B
Diameter mm
6 (± 1)
8 (± 1) 6 (± 1)
8 (± 1) 6 (± 1)
8 (± 1)
Length mm 15 ≤ L ≤ 40
1)
15 ≤ L ≤ 40
1)
15 ≤ L ≤ 40
1)
Bulk density kg / m
2
≥ 600 ≥ 600 ≥ 600
Calorific/heating value MJ / kg ≥ 16,5-19 ≥ 16,3-19 ≥ 16,0-19
Humidity /moisture Ма .-% ≤ 10 ≤ 10 ≤ 10
Dust Ма .-% ≤ 1
3)
≤ 1
3)
≤ 1
3)
Mechanical durability Ма .-% ≥ 97,5
4)
≥ 97,5
4)
≥ 96,5
4)
Ash Ма .-% 2) ≤ 0,7 ≤ 1,5 ≤ 3,5
Melting point of ash °C ≥ 1200 ≥ 1100 -
Chlorine content Ма .-%
2)
≤ 0,02 ≤ 0,02 ≤ 0,03
Sulfur content Ма .-%
2)
≤ 0,03 ≤ 0,03 ≤ 0,04
Nitrogen content Ма .-%
2)
≤ 0,3 ≤ 0,3 ≤ 1,0
Copper content mg / kg 2) ≤ 10 ≤ 10 ≤ 10
Chromium content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Arsenic content mg / kg
2)
≤ 1,0 ≤ 1,0 ≤ 1,0
Cadmium content mg / kg
2)
≤ 0,5 ≤ 0,5 ≤ 0,5
Mercury content mg / kg 2) ≤ 0,1 ≤ 0,1 ≤ 0,1
Lead content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Nickel content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Zinc content mg / kg
2)
≤ 100 ≤ 100 ≤ 100
1)
not more than 1% of the pellets may be longer than 40 mm, max. length 45 mm;
2)
dry weight;
3) particles <3.15 mm, particulate matter, before handing over the goods;
4)
measurements with Lignotester limit value ≥ 97,7% by weight.
4. TRANSP ORTATION OF THE BOILER
We recommend to transport the heating boiler to the
installation site in its packaging placed on the pallet. During
transport and installation, depending on the weight, suitable
safety devices should be used in accordance with Directive
2006/42/EC.
When transporting items weighing more than 30 kg, the use
of pallet jack, fork truck or other hoisting devices is a must.
Product must be in original packaging following the
instructions on the label - to be protected from adverse
weather conditions (snow, rain and dust) from the shocks,
and other activities likely to cause damage. In case of
malfunction of the fan or the motor drive (noise, friction)
or failure of high-tech elements such as broken LCD screen,
contact your nearest authorized service center for repairs
and maintenance.
The boiler is securely fastened with fasteners to a wooden
pallet.

Important: When installing the boiler, the wooden
pallet onto which the boiler is placed must be
removed by unscrewing the bolted connections
using flat ring wrench S13.
Table 3. Overal dimensions of Set CombiBurn DC-A,
including: Dual-chamber boiler, Burner, Auger, Fuel
hopper, ash-and soot container (packed and placed into
Fuel Hopper).
Set
CombiBurn
DC-A 30 kW
A,
mm
B,
mm
C,
mm
D,
mm
Weight,
kg
1320 1070 175 1770 527
Diagram 6. Indications dimensions
5. DELIVERY OF THE BOILER
• Inspect the integrity of the packaging upon delivery.
• Check whether all components have been delivered to
you. Boiler consignment package includes:
1) Set CombiBurn DC-A: boiler, burner, fuel hopper, ash-
and-soot container (packed and placed into fuel hopper).
2) Safety valve 3 bar.
3) Fire irons.
4) Cleaning brush for flue pipes.
5) Technical passport. Installation and operation manual .
6) Service booklet and Warranty card.
If any of the above items are missing, contact your supplier.
6. INSTALLATION OF THE HEATING BOILER

The assembly, installation and set-up of the boiler
must be performed by a technician authorized for
such operations.
Installer must indicate to the user of the installation
the minimum clearances from flammable materials
and liquids.
Requirements:
- Boiler room must be frost-proof;
- Boiler room must allow for continuous access of air
necessary to maintain combustion;
- Boilers must not be placed in inhabitable rooms;
- All boiler rooms must have correctly calculated vent
depending on the boiler output. The vent must be protected
by means of a net or grate.
The size of the vent is calculated according to the formula:
А = 6,02
*
Q - where:
А – area of the vent in cm,