SunStar KM-1170BLX User Manual Download

Page: 43 / 47

8.11) Trimmer

8.11.1) Trimming Order

When the pedal is stepped backward during sewing, trimming is conducted. The following is the trimming order.
1) When a trimming signal is entered, as in Figure (A), the trimming roller lever

①

is located at the lowest part

of the curved line of the trimmer cam. In this case, the moving blade

④

is parted from the fixed blade

③

as in

Figure (B) and conducts a rotary movement toward the opener after passing above the bobbin.

2) As in Figure (C), the trimmer cam conducts the rotary movement and the trimmer roller lever

①

contacts the

cam. At this moment, the moving blade

④

holds the lower and upper threads as in Figure (D), and performs

rotary movement toward the fixed blade

③

3) When the trimmer roller lever

①

and the trimmer cam

②

's hole

⑤

are in a line as in Figure (E), the moving

blade

④

trims the thread by contacting with the fixed blade

③

as in Figure (F).

[Fig. 8-17]

Trimmer Type-A

Trimmer Type-B

②

①

②

⑤

③

④

<A>

<B>

<C>

<E>

<F>

<E>

<F>

<D>

<C>

<D>

<A>

<B>

①

④

①

②

③

④

①

②
③

④

⑤

Summary of Contents for KM-1170BLX
















































Search results

Summary of Contents for KM-1170BLX

Reviews:

Related manuals for KM-1170BLX

Brands by name

Popular brands

SunStar KM-1170BLX, User Manual

Search results

Summary of Contents for KM-1170BLX

Reviews:

Related manuals for KM-1170BLX

Brands by name

Popular brands