SunStar KM-1170BLX, User Manual

Page: 26 / 47

26
Press and button to move to parameter number 27
After setting is complete, push button to go back to the
initial screen
Set the the adjustment dial for mutual overlapping portion of
presser foot to 3.5[mm] and press the key then the screen
is automatically changed with the buzzer sound.
• Sewing initial screen
•
Initial screen for parameter group A
• P1 setting screen for group A item 27
• P2 setting screen for group A item 27
•
P3 setting screen for group A item 27
•
Sewing initial screen
4.13) Method for Adjustment of a Potentiometer
■ ■ How to set
■ ■
Relation between presser foot lifting amount and maximum speed of the sewing machine
(page 11. ⊙ ⊙ speed Will have to refe )
▶ When setting each step of P1, P2 and P3, be sure to press button to save the set value. Otherwise, the set value will
not be saved.
▶
If you turn off the power before completing step 10, you will have to start over again.
▶
The set value of the Potentiometer will be erased if you initialize. Initialize only when it is necessary. Remember that you
have to reset the Potentiometer after initialization.
▶
If the potentiometer connector is not connected or the cabel is broken, the number in display area remains fixed.
Details Screen display How to operate
Turn on the power
Press button, then press button while holding down
button to change screen
No
1
2
3
4
5
11
Set the the adjustment dial for mutual overlapping portion of
presser foot to 4[mm] and press the key then the screen is
automatically changed with the buzzer sound.
Set the the adjustment dial for mutual overlapping portion of
presser foot to 4.5[mm] and press the key then the screen
is automatically changed with the buzzer sound.
Set the the adjustment dial for mutual overlapping portion of
presser foot to 5[mm] and press the key then the screen is
automatically changed with the buzzer sound.
Set the the adjustment dial for mutual overlapping portion of
presser foot to 5.5[mm] and press the key then the screen
is automatically changed with the buzzer sound.
Set the the adjustment dial for mutual overlapping portion of
presser foot to 6[mm] and press the key then the screen is
automatically changed with the buzzer sound.
Set the the adjustment dial for mutual overlapping portion of
presser foot to 8[mm] and press the key then the screen is
automatically changed with the buzzer sound.
•
P6 setting screen for group A item 27
•
P5 setting screen for group A item 27
•
P7 setting screen for group A item 27
• Set Completion
7
8
9
10
•
P4 setting screen for group A item 27
6