SunStar KM-1170BLX User Manual Download

Page: 31 / 47

6.2.4) Supplementary thread adjusting device

1) The supplementary thread adjusting devices

①

play a supplementary role in strengthening thread

tension in a prompt manner.

2) The tension of the supplementary thread adjusting

devices

①

should be set lower than that of the

main thread adjusting devices

②

. The tension can

be turned on/off with the functional switch.

3) The tension of the supplementary thread adjusting

device gets stronger when it is turned clockwise.

It gets weaker when the device is turned counter-

clockwise.

[Fig. 6-5]

6.2.5) Operation of thread adjusting device

The main and supplementary thread adjusting

devices

①

②

are automatically in operation.

※

When trimming or auto presser bar lift

③

activated, the tension of the main and

supplementary thread adjusting devices is

released. The supplementary thread adjusting

devices

②

can be turned on/off with the

functional switch

④

[Fig. 6-6]

[Fig. 6-7]

6.3) Adjusting upper thread length after

trimming

1) During thread trimming, only the tension of sub

thread tension adjusting device

①

works not the

tension of main device.

2) The adequate length of upper thread after trimming

is 50 ~ 60mm.

3) Strengthen the tension of thread trimming sub thread

tension adjusting device

①

to shorten the upper

thread of the needle after trimming and vice versa.

①

②

④

③

①

②

①

Summary of Contents for KM-1170BLX
















































Search results

Summary of Contents for KM-1170BLX

Reviews:

Related manuals for KM-1170BLX

Brands by name

Popular brands

SunStar KM-1170BLX, User Manual

Search results

Summary of Contents for KM-1170BLX

Reviews:

Related manuals for KM-1170BLX

Brands by name

Popular brands