①
②
③
35
7.3) Daily Cleaning
7.3.1) Cleaning
1)Set the needle at the top.
2)Open the slide plate
①
and separate the bobbin
②
from the hook
③
.
3)Remove dust from the hook
③
with soft cloth or
brush and check the damage at the hook.
4)After cleaning install the bobbin
②
to hook
③
.
[Fig. 7-1]
7.2) Cleaning
7.2.1) Cleaning Frequency and Method
NO.
Required Parts for Cleaning
Around Hook
Thread take-up lever / thread tension adjusting device
Treatment of Waste Oil
Around of moving blade and fixed blade
(Please remove dust on the moving and fixed blade under the needle
plate with air.)
Daily
Once a week
Once a month
Three times a week
1
2
4
3
Cleaning Frequency
1) Make sure to turn off the power of the machine before cleaning.
2) The parts disassembled for cleaning should be assembled in the reverse order of disassembly.
Caution
Summary of Contents for KM-1170BLX
Page 2: ......
Page 14: ...14 Fig 4 5 Thread trimming ...
