Sunrise Medical Quickie F40, Owner'S Manual

Page: 11 / 48

7 Issue 6
Preparing your wheelchair for use
Armrests / skirt guard
To fit the armrest/skirt guard
assembly, ensure that locking pin A
is in the ‘unlocked’ position shown
(Fig. 1). Lower the armrest into the
support cups and press down to
ensure a firm location. Release the
locking pin lever to lock position.
To adjust the height of the armrest,
pull back the lever of locking pin B
and hold. Lift or lower armrest to
the required position and release
pin to lock position. Check armrest
has seated properly.
Fig. 1
Locking pin A
Support clip
Armrest
Locking pin B
Skirt guard
Control pod
To connect power to the remote
control pod, take the cable/plug
from the pod and insert the plug
into the socket in the programme
control box located on the side
supporting the remote control pod
(Fig. 2).
Fig. 2
Socket
Remote
control
lead