© 2021 Sunman (Zhenjiang) Company Limited
。
All rights reserved. Specifications included in this manual are subject to change without notice.
www.sunman-energy.com
version 2021A page16 / 20
TM
4.
Fit the B end and compact it along the tape surface with a plastic roller;
5.
Open the A end, completely remove the No. 2 tape film, flatten the A end,
and compact with a plastic roller;
6.
After completely flattening, use the compaction roller to compact the non-
cell area of the module, and use the plastic roller to compact the cell area
；
7.
The minimum distance between the modules is 10mm;
8.
Repeat steps 1-7 to paste other modules.
6.4.5 Attaching modules
◼
Please keep the module's vertical and horizonal position being accurate firstly.
Do NOT tear off module and try a second time if fail the first time to install
the moudule properly.
A
端
B
端
1
2
