© 2021 Sunman (Zhenjiang) Company Limited
。
All rights reserved. Specifications included in this manual are subject to change without notice.
www.sunman-energy.com
version 2021A page13 / 20
TM
6.4.3 Gluing plan
6.4.3.1 Plan of gluing the slope below 5 degree angle.
◼
Confirm the glue area of the modules on the cleaned surface;
（
refer to Annex
B.1
）
◼
Clean again the glue area. Please wipe the glue area with the clean agent
referred in annex C .
◼
Glue the silicone sealant on the glue area by following the Gluing guidiance.
