background image

 

 

© 2021 Sunman (Zhenjiang) Company Limited

All rights reserved. Specifications included in this manual are subject to change without notice. 

www.sunman-energy.com 

version 2021A      page2  / 20 

 

 

 

TM 

2.0 Safety precautions

 

WARNING: Please read and understand all safety instructions 
before installing, wiring, operating, or maintaining modules. DC 
power is generated when the module is exposed to sunlight or 
other light sources. Direct contact with live parts of the module, 
such as terminals, whether connected or not, may result in 
personal injury or death. 

Safety rules 

 

All  installation  work  must  be  in  full  compliance  with  local  regulations  and 
corresponding national or international electrical standards.

 

 

Use insulated tools to reduce the risk of electric shock. 

 

Use appropriate protective measures (slip gloves, overalls, etc.) to avoid direct 
contact with workers at 30V DC or higher, while avoiding direct contact with 
sharp edges during installation to protect the operator's hands. 

 

Do not wear metal ornaments when installing, to avoid puncturing the modules 
and causing electric shock. 

 

If  modules  are  installed  or  operated  on  rainy  days,  strong  winds  or  dew 
mornings, appropriate protective measures should be taken to avoid injury to 
modules and workers. 

 

Children or unauthorized personnel are not allowed to access the installation 
area or module storage area. 

 

If  the  circuit  breaker  and  overcurrent  protection  circuit  breaker  cannot  be 
opened, or if the inverter cannot be turned off during the module installation 
or  wiring,  cover  the  array  modules  with  opaque material  to  stop  the  power 
output. 

 

Do not use or install damaged modules. 

 

If the module surface is damaged or worn, direct contact with the surface of 
the module may result in electric shock. 

 

Do not attempt to repair any part of the module, there are no user-accessible 
components within the module. 

 

The cover of the junction box should remain closed at all times. 

 

Do not split the modules or move any part of the module. 

Summary of Contents for eArc



























Reviews: