© 2021 Sunman (Zhenjiang) Company Limited
。
All rights reserved. Specifications included in this manual are subject to change without notice.
www.sunman-energy.com
version 2021A page17 / 20
TM
◼
Use roller to press down the module to facilitate adhesion and ensure the
gluing quality.
◼
Gaps between modules should exceed 2mm. Keep 500mm-800mm distance
between module arrays for maintainance;
◼
Follow the procedure above untill the end of installation.
6.4.6 Installation of mobile surface
During the installation of vehicles or other mobile units, please ensure the
windward side is sealed by gluing tightly to prevent the wind burst entering the
backside of modules.
