Sungrow SG125HV, User Manual

Page: 97 / 122

User Manual 10 SunAccess APP
85
Step 4
If the inverter is not initialized, you will enter the initialization protection
parameter quick setting interface as shown in Fig. 10-3 after the
Bluetooth is connected. After setting the quick setting interface, click
“Save” and the device will be initialized. The App will send start
instructions and the device will start and operate.
Fig. 10-3 Initialization protection parameter
The system interface may be different for different types of users. If
you login by “login without password”, the app will not show the
initialization protection parameter setting interface.
The regular user can only set the country, instructions (valid for
certain countries) and protection stage. The country code stands for
the protection parameter of the corresponding location and has
been set before delivery.
If the country code is not set correctly during commissioning, reset the
protection parameters. There may be faults unless this is done.
If the inverter is initialized, the app automatically turns to its homepage as
shown in Fig. 10-4 when the Bluetooth is connected.