Sungrow SG125HV, User Manual

Page: 94 / 122

82
10 SunAccess APP
10.1 Introduction to the System
By establishing a communication connection with the inverter through
Bluetooth, the SunAccess APP can access near-end maintenance to the inverter.
You can check the running info, alarms and events, set the parameters,
download the logs and update the firmware through the APP.
10.2 Acquire and install SunAccess APP
The SunAccess APP is available in iOS and Android versions. You can
download corresponding versions according to the operating
system of your phone.
This manual will utilize the iOS version to introduce the installation
and use of SunAccess APP. These steps are the same for the Android
version. The pictures in this document are indicative only since the
app version may be upgraded later. Please refer to the actual
interface of the app.
10.2.1 Installation Condition
 Required phone operating system: iOS 9.3 and above for iPhones; Android
5.1 and above for Android phones
 Recommended iPhone models: iPhone5s and above
 Ensure that the phone has enough memory to install the app
 Ensure the phone is fully charged
10.2.2 Operation Steps
Step 1
Download the SunAccess APP installation package.
a) For iOS version: search for the SunAccess in the App Store; download and