Sungrow SG125HV, User Manual

Page: 108 / 122

10 SunAccess APP User Manual
96
10.7.2 System Parameters
Click the “System parameters” to check the system parameter info and set the
related parameters as shown in Fig. 10-16.
Fig. 10-16 System parameter
Tab. 10-5 Explanation of system parameters
Parameter Description
Date Setting Time deviation between the time on the inverter and the
local time of the installation site may cause data logging
failure. Please adjust inverter time according to the local
time.
Time Setting
Total power yields
compensation
If the accumulative value “E-total” in the inverter is different
from the value in the external metering device, you should
adjust energy by “Total power yields compensation”
setting.
Reset to Factory
Defaults
All history information will be unrecoverable cleared and all
parameters will return to the default value except the
protective parameters and time once the “Reset to Factory
Defaults” operation is performed.
Device restart Restart the device.
Device information You can check: Device type, Serial number and Firmware
version