10
11
BREWING COFFEE NOW
1. After completing the steps in the Adding Water and Coffee section and with the
glass decanter and the filter basket securely in place, turn the coffeemaker on by
pressing the Brew Now button and a red indicator light will turn on.
2. After the used coffee grounds have cooled, carefully remove the filter basket and
discard them.
NOTE:
Always allow the coffeemaker to cool down before cleaning.
3. Prior to making a second pot of coffee, turn the coffeemaker off by pressing the
Brew Now button. This will reset the FRESH BREW
TM
TIMER feature.
4. Make sure the decanter is empty before starting to brew coffee.
5. Be sure to turn your coffeemaker off when no longer using it.
NOTE
: Scalding may occur if the lid is removed during brewing cycles.
The FRESH BREW
TM
TIMER feature lets you know how long your coffee has been
waiting for you. At the start of the brew cycle, the FRESH BREW
TM
TIMER feature will
automatically be activated and the clock display will change to show the time since
brewing began.
Press the FRESH BREW
TM
TIMER button once to go back to the clock function (while on
the clock mode, the FRESH BREW
TM
TIMER feature will keep counting). The display will
automatically change back to the clock after 2 hours or when the unit is turned off.
BREWING COFFEE LATER
1. You must first set the time for when you would like the coffeemaker to begin brewing
your coffee as described in
Setting the Clock and the Delay Brew Timer
section.
2. Prepare your coffeemaker as described in
Adding Water and Ground Coffee
section.
3. To activate DELAY BREW and program your coffeemaker to brew coffee at a later
time, press the BREW NOW/OFF button twice. The coffeemaker is now set to
automatically brew coffee at the pre-set later time.
4. At the pre-set time, The FRESH BREW
TM
TIMER feature will turn on indicating the
brewing has started.
5. The coffeemaker warmer plate will keep your coffee hot for 2 hours and then
automatically turn off.
NOTE
: Scalding may occur if the lid is removed during brewing cycles.
As a safety feature, your coffeemaker will NOT start again automatically the next day.
If you want your coffee to brew at the same time the following day, simply add a new
filter, coffee and water and set DELAY BREW, by repeating Steps 2 and 3 above
.
To cancel DELAY BREW:
Press Brew Now/Off Button.
CLEANING AND MAINTAINING
YOUR COFFEEMAKER
Daily Cleaning
Always turn off, unplug and allow the coffeemaker to cool before cleaning.
Remove the filter basket, permanent filter (not included on all models), decanter and
decanter lid and wash them in a solution of hot water and mild liquid soap.
Never use abrasive cleansers, steel wool pads or other abrasive materials. Dishwasher
top rack safe parts: glass decanter and lid, filter basket and permanent filter.
CAUTION!
Never immerse the coffeemaker itself in water, in any other liquid
or place in the dishwasher.
Regular Cleaning and Maintenance
Decalcifying your SUNBEAM
®
Coffeemaker
Minerals (calcium/limestone) found in water will leave deposits in your coffeemaker
and affect its performance. It’s recommended that you regularly remove these
deposits using vinegar.
1. Pour 4 cups or 20 fl. oz. of undiluted, white household vinegar into the water reservoir.
2. Place an empty 10-12 cup basket-style paper filter or permanent filter into the filter
basket and close the brew basket lid.
3. Place the empty decanter back in the unit, centered on the warmer plate.
4. Press the Clean Cycle button. For your convenience the cleaning cycle is
automatic. The entire cycle will take 45-60 minutes to complete. During the cleaning your
coffeemaker will:
a. Slow brew approx. 3 cups of cleaning solution.
b. Pause for 30 minutes.
c. After 30 minutes, your coffeemaker will brew the remainder of the cleaning
solution.
d. When complete, your coffeemaker will turn off.
BVSBJWX Series_16EFM1.qxd:Layout 2 7/15/16 9:11 AM Page 10
