Sun Yeh Electrical M Series, Operation Manual, Page: 55 / 75

【M Series】Multi-turn Electric Valve Actuator
52
2021.06
Push Button Function
Back to previous level to quit.
Switch menu item (up).
Switch menu item (down).
Save the change.

The actuator in CLOSE end position can be set to trip by Position or Torque.

Position
：
After entering the end position range, the tripping torque will be set auto-
matically at 100% and the actuator will run to fully-closed position (0%) when the
torque is lower than 100%.

Torque
：
After entering the end position range, the tripping torque will be set per the
setting value at “End Torque (Close)” and the actuator will stop running immediately
when the torque is higher than the setting value. Besides, the actuator will run to ful-
ly-closed position (0%) when the torque is lower than setting value.

Default : Position.
Push Button Function
Back to previous level to quit.
Switch menu item (up).
Switch menu item (down).
Save the change.

The actuator in OPEN end positions can be set to trip by Position or Torque.

Position
：
After entering the end position range, the tripping torque will be set auto-
matically at 100% and the actuator will run to fully-open position (100%) when the
torque is lower than 100%.
[Close End Stop Mode]
[Open End Stop Mode]