Sun Yeh Electrical M Series, Operation Manual, Page: 10 / 75

【M Series】Multi-turn Electric Valve Actuator
7
2021.06
4 Storage, Transport and Packaging
4.1 Receiving / Inspection

Carefully inspect the package for any damages resulting from shipping and report all dam-
ages to the freight carrier and seller.

After unpacking the product and information packet, please keep the cartons and any pack-
ing materials in case of product return or replacement. Verify that the items on the packing
slip or on the bill of lading are the same as what were ordered. If there is any discrepancy,
please contact the seller.

Verify if the technical data on nameplate is in accordance with what was ordered.
4.2 Storage

The actuator should be stored in a dry area with relative humidity of less than 90 % and at
temperatures between -20 °C to +40 °C (-4 °F to +104 °F).

The product shall be stored with suitable protection from corrosive substance that can dam-
age the metal and insulating parts.

The plastics conduit plug for temporary protection should not be removed until the actuator
is ready to be cabled. Use suitable cable glands with IP68 protection.
4.3 Transport

Attach ropes or hooks to actuator housing only for the purpose of lifting by hoist and not to
hand-wheel.

Actuators packaged in cartons can be ship by stand up to land, sea, or air transportation.

Packaged actuators shall avoid of violent impact and strong vibrations and be protected from
rain or snow.

The actuator with the gearbox installed should be secured with a rope or hook in the gearbox
and actuator, when lifting the device.