Sun Oracle BLADE T6320, Installation Manual, Page: 28 / 40

18 Sun Blade T6320 Server Module Installation Guide • April 2010
Caution – Dongle cables are intended for set-up, testing, or service purposes and
should be removed when not in use. They have not been evaluated for
electromagnetic compatibility (EMC) compliance and are not to be used during
normal system operation.
▼
To Connect to the Server Module SP Using a Dongle Cable
1. Connect a dongle cable to the UCP port on the front of the server module.
Refer to “Attaching a Serial Console to the Server Module” on page 6 for
information about attaching UCP dongle cables.
2. Connect a terminal or terminal emulator to the serial connector on the dongle
cable.
The ILOM login prompt is displayed.
3. Enter the user name and password when prompted.
The default user is
root
and the default password is
changeme
.
The server module ILOM prompt is displayed.
See “Changing the ILOM Password and Powering On the Host” on page 25 for
information about changing the default password.
4. When you are done, exit the ILOM software by typing:
Configuring and Viewing the IP Address for a
Server Module SP
You can configure and view the network IP address for the T6320 server module SP
in two ways:
■
By connecting to the CMM in the Sun Blade modular system chassis.
Refer to “Configuring and Viewing the IP Address for a Server Module SP
Through the CMM” on page 19 .
■
By connecting directly to the T6320 server module SP.
Refer to “Configuring and Viewing the IP Address for a Server Module SP
Through the UCP” on page 23 .
-> exit