Sun Oracle BLADE T6320, Installation Manual, Page: 35 / 40

Chapter 2 Installation and Configuration 25
Changing the ILOM Password and Powering On
the Host
▼
To Change the ILOM Password
1. At the initial login prompt on the server module SP, you logged in using the
default administrator user name and password.
2. Use the ILOM password command to change the password.
After the root password has been set, on subsequent reboots, the ILOM CLI login
prompt is displayed.
▼
To Power On the Host
After the service processor boots, the ILOM CLI prompt (->) is displayed the first
time the service processor is booted.
1. Issue the
start /SYS
command.
You see an ILOM
->
prompt on the system console. This indicates that the system
has reset. Issue the
start /SYS
command:
2. Issue the
start /SP/console
command.
hostname
login: root
Password: changeme
-> set /SP/users/root password
Enter new password: *******
Enter new password again: *******
->
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS