Sun Oracle BLADE T6320, Installation Manual, Page: 6 / 40

vi Sun Blade T6320 Server Module Installation Guide • April 2010
Setting Up the ILOM Software 12
Connection Overview 12
Connecting to the Server Module ILOM 13
Connecting Through the Chassis CMM Ethernet Port 13
Connecting to the Server Module SP Through the Chassis CMM Serial
Connector 15
Connecting to the Server Module SP Using a Dongle Cable 17
Configuring and Viewing the IP Address for a Server Module SP 18
Configuring and Viewing the IP Address for a Server Module SP Through
the CMM 19
▼ To View or Configure the IP Address for the Server Module SP When
Assigned by DHCP — Through the CMM 19
▼
To View or Configure the IP Address for the Server Module SP Using
Static IP Addresses — Through the CMM 20
Configuring and Viewing the IP Address for a Server Module SP Through
the UCP 23
▼
To View or Configure the IP Address for the Server Module SP When
Assigned by DHCP — Through the UCP 23
▼ To View or Configure the IP Address for the Server Module SP Using
Static IP Addresses — Through the UCP 24
Changing the ILOM Password and Powering On the Host 25
▼ To Change the ILOM Password 25
▼
To Power On the Host 25
Powering On and Powering Off the Server Module 26
▼
To Apply Standby Power for Initial Service Processor Configuration 26
▼ To Power on Main Power for All Server Components 27
▼
To Shut Down Main Power Mode 27
Installing the Solaris Operating System on a Hard Drive 28
JumpStart Server Installation 28
JumpStart Server Configuration 29