Sun Oracle BLADE T6320, Installation Manual, Page: 21 / 40

Chapter 2 Installation and Configuration 11
a. Attach the dongle cable to the server module.
Refer to “Attaching a Serial Console to the Server Module” on page 6 .
b. Attach a serial cable from the terminal server to the virtual console connector
on the dongle cable.
6. Position the server module vertically so that the ejectors are on the right.
FIGURE 2-1
shows the server module being inserted into the chassis. See box 1.
FIGURE 2-1
Inserting the
Sun Blade T6320
Server Module Into the Sun Blade Modular
System
7. Push the server module into the slot until the module is about 1.5 cm (one-half
inch) from
the chassis front.
See box 2 in
FIGURE 2-1
.