Sun Oracle BLADE T6320, Installation Manual, Page: 16 / 40

6 Sun Blade T6320 Server Module Installation Guide • April 2010
Attaching a Serial Console to the Server Module
To communicate directly with the Sun Blade T6320 server module, you can connect a
serial console to the universal connector port (UCP) on the front panel of the server
module by using a dongle cable. See
“Connecting to the Server Module SP Using a
Dongle Cable” on page 17 for more information.
Caution – Dongle cables are intended for set-up, testing, or service purposes and
should be removed when not in use. They have not been evaluated for
electromagnetic compatibility (EMC) compliance and are not to be used during
normal system operation.
You can order an optional dongle cable with the Sun Blade T6320 server module, or
you can use the dongle cable that shipped with your Sun Blade modular system.
TABLE 1-2
lists the ports to be used for serial connections to the server module using
UCP-3 or UCP-4 dongle cables.
FIGURE 1-2
shows possible connections on the dongle
cable.
▼
To Insert the Dongle Cable
●
Insert the connector straight into the UCP on the server module.
FIGURE 1-2
illustrates how to insert the dongle cable into the UCP.
TABLE 1-2
Serial Connectors for Dongle Cables
Dongle Cable Serial Connector
UCP-3 RJ-45.
UCP-4 DB-9. Can be used with optional DB-9–to–RJ-45 serial adapter.
Note - The RJ-45 connector on UCP-4 dongle cables is not supported on
Sun Blade T6320 server modules.