Sun Oracle BLADE T6320, Installation Manual, Page: 26 / 40

16 Sun Blade T6320 Server Module Installation Guide • April 2010
4. Press Enter on the terminal device.
The connection between the terminal device and the CMM is established.
Note –
If you connect a terminal or emulator to the serial port before it has been
powered up or during its power-up sequence, you will see boot-up messages.
When the system has booted, the CMM ILOM software displays its login prompt:
The first string in the prompt is the default host name. It consists of the prefix
SUNCMM and the CMM ILOM’s MAC address. The MAC address for each
service processor is unique.
5. Log in to the CMM ILOM software:
a. Type the default user name,
root
.
b. Type the default password,
changeme
.
Once you have successfully logged in, the CMM ILOM displays its default
command prompt:
You are now connected to the CMM ILOM software CLI.
See “Changing the ILOM Password and Powering On the Host” on page 25 for
information about changing the default password.
6. Navigate to the server module ILOM by typing this command:
Where n is an integer (0 – 9) representing the identifier for the target server
module.
7. Enter the
start
command
.
A prompt is displayed.
8. Enter
y
to continue or
n
to cancel.
After you enter
y
, the ILOM software running on the server module SP prompts
for the password specific to that server module SP.
SUNCMM
nnnnnnnnnn
login:
->
-> cd /CH/BL
n
/SP/cli