Sun Microsystems ZFS, Installation Manual

Page: 99 / 108

Configure Network Time Protocol (NTP) to synchronize the appliance time clock. See the NTP
section of the System Administration Guide at
http://wikis.sun.com/display/fishworks
(
http://wikis.sun.com/display/fishworks
) for additional documentation.
Configure Time. Configure the Network Time Protocol.
Subcommands that are valid in this context:
help [topic] => Get context-sensitive help. If [topic] is specified,
it must be one of
"
builtins
"
,
"
commands
"
,
"
general
"
,
"
help
"
,
"
script
"
or
"
properties
"
.
show => Show information pertinent to the current context
commit => Commit current state, including any changes
abort => Abort this task (potentially resulting in a
misconfigured system)
done => Finish operating on
"
ntp
"
enable => Enable the ntp service
disable => Disable the ntp service
get [prop] => Get value for property [prop]. (
"
help properties
"
for valid properties.) If [prop] is not specified,
returns values for all properties.
set [prop] => Set property [prop] to [value]. (
"
help properties
"
for valid properties.) For properties taking list
values, [value] should be a comma-separated list of
values.
caji:maintenance system setup ntp> set servers=0.pool.ntp.org
servers = 0.pool.ntp.org (uncommitted)
caji:maintenance system setup ntp> commit
caji:maintenance system setup ntp> done
aksh: done with
"
ntp
"
, advancing configuration to
"
directory
"
...
Refer to the NIS, LDAP and Active Directory sections of the System Administration Guide at
http://wikis.sun.com/display/fishworks (
http://wikis.sun.com/display/fishworks
) for
additional documentation.
Configure Name Services. Configure directory services for users and groups. You
can configure and enable each directory service independently, and you can
configure more than one directory service.
Subcommands that are valid in this context:
nis => Configure NIS
ldap => Configure LDAP
ad => Configure Active Directory
Initial
Chapter 4 • Powering On and Configuring the System 99