Sun Microsystems ZFS, Installation Manual

Page: 45 / 108

Requirements Yes No NA
Do you know the required operating voltages and electrical current levels
of the device and peripherals? As an aggregate, the system will draw
48amps at 208 volts
. This needs to be split across two separate power
grids and divided into smaller circuits.
Are separate power sources available for the new equipment at the
designated location?
Are power outlets available for the new equipment at the designated
location?
Are enough power outlets provided? 10 L6-20 total.
Six L6-20/C19
(cabinet) and four L6-20/C13 (controllers)
split across two
separate power grids.
Are the circuit breakers for the equipment suitable in terms of voltage and
current-carrying capacities?
Does the power frequency meet the equipment specifications?
Logistics
Confirm that the logistical requirements for the cabinet in Unpacking and Moving the Cabinet
have been addressed.
Requirements Yes No NA
Do you have contact information for data center personnel?
Is there security or access control for the data center?
Are laptops, cell phones, and cameras allowed in the data center?
Does the building have a delivery dock?
Is there a delivery/unpacking/staging area?
Is the delivery inside?
If the delivery is not inside, is the site prepared for uncrating?
Is the unpacking/staging area protected from the elements?
Does the building have an adequate receiving area?
Will sufficient moving personnel be available to install the hardware?
Are you prepared for uncrating and trash removal?Is uncrating of cabinet
and cabinet trash removal required?
Are there any restrictions on delivery truck length, width or height?
Cabinet
Chapter 2 • Installation 45