Sun Microsystems ZFS, Installation Manual

Page: 16 / 108

Prerequisites
Refer to the Quick Setup poster that shipped with the product or the Sun ZFS Storage Appliance
Service Manual located on http://wikis.sun.com/display/fishworks (
http://wikis.sun.com/
display/fishworks
) for an overview of your controller.
■
7120 Overview - view component diagrams and specifications
■
7320 Overview - view component diagrams and specifications
■
7420/7720 Overview - view component diagrams and specifications
Tools and Equipment Needed
To install the system, you need the following tools:
■
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
■
Pencil, stylus, or other pointed device, for pushing front panel buttons
You also need a system console device, such as one of the following:
■
Sun workstation
■
ASCII terminal
■
Terminal server
■
Patch panel connected to a terminal server
Tasks
7x20 Controllers Tasks
▼
Installing Mounting Brackets on the Controller Chassis
If the mounting brackets are shipped inside the slide rails, you must remove them before
beginning this procedure, as follows.
■
Unpack the slide rails and locate the slide rail lock at the front of the assembly.
■
Squeeze and hold the tabs at top and bottom of the lock (1) while you pull the mounting
bracket out to the stop.
■
Push the mounting bracket release button toward the front of the mounting bracket (2)
while withdrawing the bracket from the assembly.
The following graphic illustrates the procedure for disassembling the 7120/7320 rail kit.
7x20 Controllers
Sun ZFS Storage 7x20 Appliance Installation Guide • November 2010 16