Sun Microsystems ZFS, Installation Manual

Page: 36 / 108

Caution -
The shipping pallet is designed so that the cabinet can only be unloaded in one
direction. Orient the shipping container so that the label RAMPS ATTACH THIS SIDE is
facing the direction the cabinet should be offloaded from the pallet. When you roll the cabinet
off the shipping pallet, you will need a total distance of at least 15 feet/4.5 meters for safe
maneuvering, as shown above.
Tools
During unpacking, you will need these tools to unpack the shipping package:
■
Cutters for the package strapping tape
■
#2 Phillips screwdriver
These tools are included in the shipping package:
■
13 mm/17 mm combination open end wrench
■
19 mm open end wrench
Physical Specifications
The following figure shows the system cabinet.
Figure Legend
1 Fan trays 5 Power supplies
2 Leaf controller cards (LCCs) 6 Rack controller card (RCC)
3 Disk trays 7 Storage controllers
Cabinet
Sun ZFS Storage 7x20 Appliance Installation Guide • November 2010 36