Sun Microsystems ZFS, Installation Manual

Page: 97 / 108

Performing Initial Configuration with the CLI
Login using the password you provided during Installation :
caji console login: root
Password:
Last login: Sun Oct 19 02:55:31 on console
To setup your system, you will be taken through a series of steps; as the setup
process advances to each step, the help message for that step will be
displayed.
Press any key to begin initial configuration ...
In this example, the existing settings are checked (which were obtained from the DHCP server),
and accepted by typing
done
. To customize them at this point, enter each context (datalinks,
devices and interfaces) and type
help
to see available actions for that context. See the Network
page for additional documentation or refer to the System Administration Guide at
http://wikis.sun.com/display/fishworks. (
http://wikis.sun.com/display/fishworks.
) Pay
careful attention to the Clustering Considerations for Networking section if you will configure
clustering.
aksh: starting configuration with
"
net
"
...
Configure Networking. Configure the appliance network interfaces. The first
network interface has been configured for you, using the settings you provided
at the serial console.
Subcommands that are valid in this context:
datalinks => Manage datalinks
devices => Manage devices
interfaces => Manage interfaces
help [topic] => Get context-sensitive help. If [topic] is specified,
it must be one of
"
builtins
"
,
"
commands
"
,
"
general
"
,
"
help
"
or
"
script
"
.
show => Show information pertinent to the current context
abort => Abort this task (potentially resulting in a
misconfigured system)
done => Finish operating on
"
net
"
caji:maintenance system setup net> devices show
Devices:
DEVICE UP MAC SPEED
nge0 true 0:14:4f:8d:59:aa 1000 Mbit/s
nge1 false 0:14:4f:8d:59:ab 0 Mbit/s
nge2 false 0:14:4f:8d:59:ac 0 Mbit/s
nge3 false 0:14:4f:8d:59:ad 0 Mbit/s
Initial
Chapter 4 • Powering On and Configuring the System 97