Sun Microsystems W1100z, User Manual

Page: 82 / 106

4-34 Sun Java Workstation W1100z and W2100z User Guide • January 2005
■
For an AGP card :
a. Make sure that the card latch, at the forward end of the AGP slot, is completely
opened (see (1) on
FIGURE 4-24
).
b. Position the card in the selected slot (see (2) on
FIGURE 4-24
). Ensure that the
notch, on the bottom right corner of the card, engages the latch.
c. Press down on the card until it is completely seated in the slot.
d. Pivot the latch up and towards the rear of the chassis to secure the card in
place.
Note –
If the latch cannot be engaged with a minimum of force, the card is not
correctly seated. Remove the card, reinsert it, and attempt to engage the latch again.