Chapter 3
Diagnostics
3-13
3.6.2
Adding a Diagnostic Partition to the First
Bootable Disk
Pc-Check can only view the first or second hard disk on the system from the boot
loader. The software automatically installs the diagnostic partition on the first
bootable disk. To add the diagnostic partition on the first bootable disk:
1. Insert the Supplemental CD into the CD-RW/DVD-ROM tray.
2. Reboot the workstation.
3. At the Supplemental CD Main Menu, type
1
to run Hardware Diagnostics.
4. Select Create Diagnostic Partition at the Main Menu.
■
If the first bootable disk is clear of partitions then the Sun Microsystems
Partitioning Utility window will appear. It states:
Your primary hard disk
is not partitioned.
Would you like to partition it now?
■
Select Yes and press Enter.
■
A window will appear stating,
Partitioning complete.
Your machine
will now be restarted
.
■
If the first bootable disk is not clear of partitions then a window will appear
stating that it is unable to create a hardware diagnostic partition because there are
already partitions on the disk.
■
If this happens, then go to
Section
3.6.1, “Removing Existing Partitions on a
Hard Disk” on page
3-12
to clear the partitions from the disk.
■
Repeat
Step
1
through
Step
4
of this procedure.
5. Press Enter to reboot your workstation.
Summary of Contents for W1100z
