4-46
Sun Fire X2100 Server User Guide • April 2007
4.5.13
Cables
The following system cables have a connector at each end, and therefore can be
removed or installed by the customer. Cables for DVD or SP cards are included with
the component kits. All other cables are permanently attached to a system
component at one end and must be removed or replaced along with the component.
See
FIGURE 4-37
and
FIGURE 4-38
for the locations of connectors. You can also refer to
the cabling diagram on the service label attached to the cover of the system.
Each cable connector on the motherboard is labeled to help you identify the cable to
which it should be connected.
To remove and install system cables:
1. Press the power button to turn off the system power, and power-off all of the
peripherals connected to the server.
2. Remove the top cover of the server.
3. Replace any cables that need to be replaced. (See
FIGURE 4-37
or
FIGURE 4-38
).
4. Ensure that all cable routing is correct, and that all of the cable connectors are
properly seated, before installing the left-side access panel. See
FIGURE 4-39
.
TABLE 4-2
Sun Fire X2100 Server Cable Kit
Cable
Part Number
LED cable
422743500001
USB cable
422743500002
DVD cable
422743500004
SATA 1 cable -blue
422743500006
SATA 2 cable -green
422743500005
IPMI cable 1
422743500007
Power cable
422743500009
Front cable
422743500010
Fan cable
422743500011
