4-12
Sun Fire X2100 Server User Guide • April 2007
4.5.3
PCIe Card
The following procedure describes how to add or replace a PCIe card.
4.5.3.1
Removing the PCIe Card and Riser
Follow these steps to remove the PCIe card and riser:
1. Power off the system and remove the cover as described in
Section 4.3, “Powering
Off the Server and Removing the Cover” on page 4-3
.
2. Loosen the captive screw holding the PCIe card riser assembly.
FIGURE 4-8
Removing the PCIe Card Riser Assembly
3. Pull the assembly upward and out of the chassis.
