Chapter 4
Maintaining the Sun Fire X2100 Server
4-9
4.5.2
SMDC Service Processor
The following procedure describes how to remove and install the optional service
processor (SP), the M3290 Service Management Daughter Card (SMDC). For more
information on the SMDC and its setup, see
Appendix C
.
4.5.2.1
Removing the SMDC
If you are installing an SMDC card for the first time, skip this section and go to
Section 4.5.2.2, “Installing the SMDC Card” on page 4-10
.
1. Unfasten the four screws securing the SP card to the DVD drive cage.
FIGURE 4-5
Removing the SP Card
2. Disconnect the data cable from the SATA backplane.
3. Lift the SP card from the chassis.
