Sun Microsystems StorEdge T3+, Installation And Configuration Manual

Page: 95 / 228

Chapter 6 Array Installation 73
3. Use the
passwd
command to set a password for the root account.
Press Return when prompted for the
OLD password
.
Note – It is important to set a
root
password for security reasons.
4. Set the gateway using the
set gateway
command.
The gateway address enables you to access the array outside the subnet.
For example:
5. Set the netmask using the
set netmask
command.
The netmask specifies the network mask used to implement IP subnetting.
6. Set the host name using the
set hostname
command.
7. Use the
set timezone
command to set the time zone region.
For the time zone region, see the Sun StorEdge T3+ Array Administrator’s Manual. For
example, if you are located in the Pacific Standard Time (PST) time zone, the region
would be America/Los_Angelos as shown:
:/:<1>passwd
OLD password: <
Return
>
NEW password:
New password
NEW password (confirm):
New password
:/:<2>
:/:<3> set gateway 129.150.47.1
:/:<4> set netmask 255.255.255.0
:/:<5> set hostname
hostname
:/:<6> set timezone :America/Los_Angelos