Sun Microsystems StorEdge T3+, Installation And Configuration Manual

Page: 110 / 228

88 Sun StorEdge T3+ Array Installation and Configuration Manual • April 2002
10. Verify that the new volume is available to the host system by using the
format(
1M
)
command on the data host.
Changing the Default Configuration
The default configuration for the Sun StorEdge T3+ Array is a RAID 5 volume.
■
If you want to change the default configuration, do so now before continuing the
installation process. Configuration options for the array are discussed in
Chapter 8 and Chapter 9. The command-line procedures for reconfiguring the
array are in the Sun StorEdge T3+ Array Administrator’s Manual. Once you have
reconfigured the array, return to this chapter and proceed to “Connecting the
Host System” on page 89.
■
If you are not changing the default configuration, proceed to “Connecting the
Host System” on page 89.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN4.2G cyl 3880 alt 2 hd 16 sec 135>
/pci@1f,4000/scsi@3/sd@0,0
1. c2t1d0 <SUN-T300-0113 cyl 34145 alt 2 hd 64 sec 128>
/pci@6,2000/SUNW,ifp@1/ssd@w50020f23000002ba,0
2. c1t1d0 <SUN-T300-0113 cyl 34145 alt 2 hd 64 sec 128>
/pci@6,0/SUNW,socal@1,0/sf@0,0/ssd@w50020f2300000121,0