Sun Microsystems StorEdge T3+, Installation And Configuration Manual

Page: 80 / 228

58 Sun StorEdge T3+ Array Installation and Configuration Manual • April 2002
■
array-name
is the name of the array you are installing.
2. Add the IP address and array name to the
/etc/hosts
file.
For example:
In this example:
192.129.122.111
is the assigned IP address.
3. Edit the
/etc/nsswitch.conf
file to reference the local system files.
To ensure that the Solaris software environment uses the changes made to the
/etc/ethers
and
/etc/hosts
files, edit the
host
and
ethers
entries in the
/etc/nsswitch.conf
file so that the
files
parameter appears before the
[NOTFOUND=return]
statements.
4. Determine if the reverse address resolution protocol (RARP) daemon is running
by typing:
■
If the RARP daemon is running, you must kill the process and restart it for the
host to recognize the changes you just made. To kill the process, type:
The process ID was provided in the
ps -eaf | grep rarpd
command output.
■
If the RARP daemon is not running, proceed to the next step.
5. Start the RARP daemon in the Solaris software environment by typing:
The IP address will automatically download to the array after you install the array
and power on.
192.129.122.111
array-name
hosts: nis files [NOTFOUND=return]
ethers: nis files [NOTFOUND=return]
# ps -eaf | grep rarpd
# kill
process ID
# /usr/sbin/in.rarpd -a &