Sun Microsystems StorageTek SL500 User Manual Download Page 346

Page: 346 / 436

General Library Operation Tasks

314

SL500 User’s Guide • July 2008

Revision: KA • 96116

▼

Return the Library to Ready Status

To return the library to ready status:

1. Make sure cartridges are inserted correctly in the storage cells or tape drives and that

they do not block the path of the X table assembly.

2. Close the door and lock it by turning the key counterclockwise; put the key in a safe

place.

3. Make sure the power switch are set to the ON position (1).

4. Check the status display of the SL Console to make sure the library goes to Ready

Status when initialization and audit are complete.

5. Enter the system command to place all tape drives online.

6. When all tape drives are online, enter the command to place the library online.

Summary of Contents for StorageTek SL500





















































































































































































































































































































































































































































Search results

Summary of Contents for StorageTek SL500

Reviews:

Sun Microsystems StorageTek SL500, User Manual, Page: 346 / 436

Search results

Summary of Contents for StorageTek SL500

Reviews: